Datoptic RM12-S6.TB - Rackmount Manual do Utilizador descarregar pdf (Página 41)

WEB BROWSER-BASED CONFIGURATION

150

• Time to Hdd Low Power Idle

This option delivers lower power consumption by automatically

unloading recording heads during the setting idle time. The val-

ues can be selected “Disabled” or within the range 2 to 7 min-

utes.

• Time To Hdd Low RPM Mode

This function can automatically spin disks at lower RPM if there

have not been used during the setting idle time. The values can

be selected “Disabled” or within the range 10 to 60 minutes.

• Time To Spin Down Idle HDD

This function can automatically spin down the drive if it hasn’t

been accessed for a certain amount of time. This value is used

by the drive to determine how long to wait (with no disk activity,

before turning off the spindle motor to save power). The values

can be selected “Disabled” or within the range 1 to 60 minutes.

• SATA Power Up In Standby

SATA Power Up In Standby (power management 2 mode, PM2)

is a SATA disk drive conguration which prevents the drive from

automatic spinup when power is applied. “Enabled” option al-

lows the drive to be powered-up into the Standby power man-

agement state to minimize inrush current at power-up and to al-

low the controller to sequence the spinup of devices. It is mainly

for server/workstation environments operating in multiple-drive

congurations.

6.8.4 Ethernet Conguration

Use this feature to set the controller Ethernet port conguration.

A customer doesn’t need to create a reserved space on the arrays

before the Ethernet port and HTTP service are working. The rm-

ware-embedded web browser-based RAID manager can access it

from any standard internet browser or from any host computer

either directly connected or via a LAN or WAN with no software or

patches required.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 89 90

Sem comentários

Datoptic RM12-S6.TB - Rackmount Manual do Utilizador Página 41