Datoptic ARC-1680 Series Manual do Utilizador descarregar pdf (Página 103)

DRIVER INSTALLATION

103

1. Ensure that you have closed all applications and are logged in

with administrative rights.

2. Open “Control Panel” and start the “Add/Remove Program”

icon and uninstall and software for the SAS RAID controller.

3. Go to “Control Panel” and select “System”. Select the “Hard-

ware” tab and then click the “Device Manager” button. In device

manager, expand the “SCSI and RAID Controllers” section. Right

click on the Areca SAS RAID controller and select “Uninstall”.

4. Click Yes to conrm removing the SAS RAID driver. The

prompt to restart the system will then be displayed.

4.3 Driver Installation for Linux

This chapter describes how to install the SAS RAID controller driver

to Red Hat Linux, SuSE and other versions of Linux. Before install-

ing the SAS RAID driver to the Linux, complete the following ac-

tions:

1. Install and congure the controller and hard disk drives accord-

ing to the instructions in Chapter 2 Hardware Installation.

2. Start the system and then press Tab+F6 to enter the McBIOS

RAID manager conguration utility. Using the McBIOS RAID man-

ager to create the RAID set and volume set. For details, see Chap-

ter 3, McBIOS RAID Manager.

If you are using a Linux distribution for which there is not a com-

piled driver available from Areca, you can copy the source from the

SAS software CD or download the source from the Areca website

and compile a new driver.

Compiled and tested drivers for Red Hat and SuSE Linux are includ-

ed on the shipped CD. You can download updated versions of com-

piled and tested drivers for RedHat or SuSE Linux from the Areca

web site at http://www.areca.com.tw. Included in these downloads

is the Linux driver source, which can be used to compile the updat-

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 183 184

Sem comentários

Datoptic ARC-1680 Series Manual do Utilizador Página 103